25–26 Nov 2015
پژوهشگاه دانش‌های بنیادی
Asia/Tehran timezone
After your paper is ACCEPTED, Upload the last version of your full paper file in DOCX & PDF (from my contributions>view>files>add material)

CONCEPTUAL DESIGN OF CONTROL SYSTEM FOR IPM LINEAR ELECTRON ACCELERATOR

Not scheduled
15m
سالن همایش‌ها (پژوهشگاه دانش‌های بنیادی)

سالن همایش‌ها

پژوهشگاه دانش‌های بنیادی

تهران - فرمانیه - جنب کوه نور
Poster شتابگر خطی

Speaker

Mr Saeed Haghtalab (Shahid Beheshti University-SBU)

Description

The linear electron accelerator of institue for research and fundamental sciences (IPM), is a traveling wave accelerator consisting of 62 components in five major sections: control and safety, beam injection, radio ferequency production and transmision, acceleration tube and target. So far, the various components of this accelerator have been designed and constructed. This article is the research result in which the controlled parts and the inputs and outputs have been derived. Conceptual design shows that 25 quantities required to be measured and 16 of them are needed to be controlled in this accelerator. Identifing inputs and outputs of each part, providing the link among them and implementing an appropriate logic control, are the achievements of this article. According to obtained results, detailed design and construction of appropriate control system will be performed using Siemens Step7-300 PLC with WINCC and EPICS in management level.

چکیده به فارسی

شتابدهنده خطی الکترون پژوهشگاه دانش¬های بنیادی، یک شتابدهنده موج رونده است که از 62 جزء در پنج بخش اصلی کنترل و ایمنی، تزریق باریکه، تامین و انتقال موج رادیوفرکانسی، تیوب شتابدهی و هدف تشکیل شده است. تاکنون اجزاء مختلفی از این شتابدهنده طراحی و ساخته شده¬اند. این مقاله حاصل پژوهشی است که در آن با شناسایی دقیق اجزاء و نحوه عملکرد آن¬ها، قسمت¬های کنترل شونده و نحوه ورودی و خروجی¬های آن¬ها استخراج شده اند. طراحی مفهومی انجام شده نشان می¬دهد که در شتابدهنده موردنظر به اندازه¬گیری 25 کمیت نیاز است که 16 مورد از آن¬ها به کنترل نیاز دارند. شناسایی نوع سیگنال (آنالوگ یا دیجیتال) ورودی به عملگرها یا خروجی از حسگرها، ارائه ارتباط میان آن¬ها و منطق کنترلی مناسب برای این شتابدهنده از دستاوردهای این مقاله است. بر اساس نتایج بدست آمده، طراحی جزئی و ساخت سیستم کنترلی مناسب با استفاده از سیستم PLC Step7-300 شرکت زیمنس با پیاده¬سازی سطح مدیریت بر مبنای WINCC و EPICS انجام خواهد گرفت.

عنوان مقاله به فارسی طراحی مفهومی سیستم کنترل شتابدهنده خطی الکترون پژوهشگاه دانشهای بنیادی

Author

Mr Saeed Haghtalab (Shahid Beheshti University-SBU)

Co-authors

Prof. Fereidoon Abbasi Davani (Shahid Beheshti University) Prof. Mohammad Lamehi Rachti (AEOI) Dr farshad ghasemi (AEOI)

Presentation materials

There are no materials yet.

Peer reviewing

Paper

Paper files: