Skip to main content
25–26 Nov 2015
پژوهشگاه دانش‌های بنیادی
Asia/Tehran timezone
After your paper is ACCEPTED, Upload the last version of your full paper file in DOCX & PDF (from my contributions>view>files>add material)

The Feasibility Study Of Fabrication Of Acceleration Cavity Of Electron Accelerator With Multi Couplers Of Input RF Power

Not scheduled
15m
سالن همایش‌ها (پژوهشگاه دانش‌های بنیادی)

سالن همایش‌ها

پژوهشگاه دانش‌های بنیادی

تهران - فرمانیه - جنب کوه نور
Poster شتابگر رودوترون یزد

Speaker

Mr ali mohammad poursaleh (aeoi)

Description

In this paper, the design and possibility study of fabrication of a new RF system in medium and high power industrial electron accelerator has been studied, Where a separate solidstate amplifier with multiple input coupler coupled to the accelerator cavity. In fact, this method instead of using a one big power and RF amplifier, the smaller multi coupler and RF amplifier connected to the accelerator cavity is used. In this design the accelerator cavity plays the role of acceleration cavity and RF power combiner. So in this method for fabrication of highpower accelerators donot need to high power sources and combiner that provided of them is difficult or expensive. The results of this study showed that by low-power RF amplifier can be built easely the high power electron accelerator can be achieved.

چکیده به فارسی

در این مقاله به طراحی و بررسی امکان ساخت یک سیستم جدید RF در یک شتابدهنده الکترون صنعتی با توان متوسط و بالا پرداخته شده است، که در آن تقویت کننده های ترانزیستوری بصورت مجزا با چندین کوپلر ورودی به کاواک شتابدهنده کوپل شده اند. در واقع در این روش به جای استفاده از یک تقویت کننده و کوپلر تزویج توان بزرگ از چندین تقویت کننده وکوپلر کوچک تر متصل به کاواک شتابدهنده استفاده گردیده است .در این طرح کاواک شتابدهنده علاوه بر نقش اصلی آن بعنوان محفظه شتاب، نقش ترکیب کننده توان را نیز بعهده دارد. بنابراین در این روش برای ساخت شتابدهندهای پرقدرت به منابع یا ترکیب کننده های پرتوان RF که ساخت یا تهیه آنها مشکل و یا پرهزینه است نیازی نسیت. نتایج این تحقیق نشان داد که با استفاده از تقویت کننده کم توان RF که امکان ساخت آنها به سهولت فراهم می باشد می توان به شتابدهنده های پرقدرت الکترون دست یافت.

عنوان مقاله به فارسی امکان سنجی ساخت کاواک شتابدهنده الکترون با چندین کوپلر ورودی تزویج توان

Author

Co-authors

Presentation materials

There are no materials yet.

Peer reviewing

Paper

Paper files: