25–26 Nov 2015
پژوهشگاه دانش‌های بنیادی
Asia/Tehran timezone
After your paper is ACCEPTED, Upload the last version of your full paper file in DOCX & PDF (from my contributions>view>files>add material)

Physicial design of beam trancport line of a mid infrared free electron laser

Not scheduled
15m
سالن همایش‌ها (پژوهشگاه دانش‌های بنیادی)

سالن همایش‌ها

پژوهشگاه دانش‌های بنیادی

تهران - فرمانیه - جنب کوه نور
Poster لیزر و پلاسما

Speaker

masoomeh moradi (shahid beheshti univercity)

Description

The design of the transport line is very important and operational in the beam dynamics to achieve an optimized design in a way with the small beta function, low energy spread and divergence in the whole transport line. In this paper we have studied the structure of the electron beam transport line for a mid infrared free electron laser. The most important purpose of this work is designing an optimized transportation line to transport an electron bunch extracted from a thermionic radio frequency electron gun to a linear accelerator with energy in order of 50 mega electron volt and eventually to an undulator to produce the infrared radiation . The required Twiss parameters at the entrance of the undulator which were defined the quality of the electron beam, the bunch length and the energy spread of the electron beam were investigated. The numerical beam simulations with the computer codes OPA and ELEGANT were performed. The most suited magnetic field gradient for the alpha magnet (i.e., magnetic compressor) were obtained for this design in order of 350 G/cm..

چکیده به فارسی

در بحث دینامیک باریکه ، طراحی خط انتقال باریکه موضوعی بسیار مهم و با اهمیت می باشد؛ به گونه ای که بتوان با تابع بتا کوچک ، پهن شدگی انرژی پایین و واگرایی کم در کل خط انتقال به یک طرح بهینه دست یافت.در کار حاضر ساختار خط انتقال باریکه الکترونی برای استفاده در یک لیزر الکترون مادون قرمز را مورد بررسی قرار داده ایم. انتقال بهینه خوشه الکترونی از تفنگ الکترونی گرمایونی فرکانس رادیویی به یک شتابدهنده خطی با انرژی 50 مگا الکترون ولت و در نهایت به یک آندولاتور با خروجی تابش مادون قرمز مهمترین هدف طراحی خط انتقال است. پارامترهای توییس موردنیاز در ورودی آندولاتور که معرف کیفیت باریکه الکترونی هستند ونیز طول خوشه الکترونی و میزان پهن شدگی انرژی باریکه الکترونی بررسی و با استفاده از نرم افزارهای اُپا و الگانت شبیه سازی شده است. برای این طراحی خط انتقال بهترین گرادیان میدان مغناطیسی برای فشرده ساز مغناطیسی آلفا مگنت 350 گاوس بر سانتی متر است

عنوان مقاله به فارسی طراحی فیزیکی خط انتقال یک لیزر الکترون آزاد مادون قرمز

Author

masoomeh moradi (shahid beheshti univercity)

Co-authors

ali rajabi (shahid beheshti univercity) Prof. babak shokri (shahid beheshti univercity)

Presentation materials

There are no materials yet.

Peer reviewing

Paper

Paper files: