Skip to main content
25–26 Nov 2015
پژوهشگاه دانش‌های بنیادی
Asia/Tehran timezone
After your paper is ACCEPTED, Upload the last version of your full paper file in DOCX & PDF (from my contributions>view>files>add material)

Designing and Manufacturing of the Machine for Automatic Cutting of Radiotherapy Protection Blocks

Not scheduled
15m
سالن همایش‌ها (پژوهشگاه دانش‌های بنیادی)

سالن همایش‌ها

پژوهشگاه دانش‌های بنیادی

تهران - فرمانیه - جنب کوه نور
Poster کاربردها در پزشکی

Speakers

Mr Hamid Mohammad Ghasemi (Behyaar Sanaat Sepahan)Mr Navid Nejatbakhsh (Behyaar Sanaat Sepahan)

Description

Radiation protection blocks are used for constructing different forms of cancerous tumors in the form of lead blocks. After preparing blocks, lead is poured into it, which depending on dimensions and forms of cancerous tumors, a lead block is prepared for being installed on the medical linear accelerator and collimator. The task of these shielding blocks is to control and limit radiation for shielding healthy cells during radiation therapy. The advantage of using the method of lead blocks in preparing radiotherapy shields is their high accuracy. In this method, by moving a hot wire, desired forms are created on the foam, which provides the possibility of constructing the smallest protection blocks with accuracy higher than ±0.5 mm. achieving this accuracy in other methods is approximately impossible. In the machine designed and developed by Behyaar Sanat Sepahan Co. it has been tried that this product, in addition to equality in terms of quality and facilities compared to its foreign counterparts, provides a user-friendly and convenient environment for operators’ performance. As a consequence, it can results in the acceleration in operations and stages of doing radiotherapy. The produced machine enjoys the capability of cutting different kinds of foam with each type of density which provides the accuracy ±0.4 mm. In the present article, stages of designing and manufacturing the machine for cutting radiation protection blocks produced by Behyaar Sanat Sepahan Co. is to be investigated.

چکیده به فارسی

قالب های حفاظتی رادیوتراپی جهت ساخت انواع اشکال تومورهای سرطانی بصورت بلوک های سربی مورد استفاده قرار می گیرد.پس از تهیه قالب، عمل سرب ریزی درون آن انجام می گیرد، که بسته به ابعاد و شکل تومور سرطانی، یک قالب سربی جهت نصب بر روی کلیماتور شتاب دهنده خطی تهیه می شود.وظیفه این بلوک های حفاظتی، کنترل و محدود کردن اشعه، جهت محافظت سلول های سالم در حین انجام پرتودرمانی می باشد.مزیت استفاده از روش قالب های سربی در تهیه حفاظ های رادیوتراپی، دقت بالای آن است. در این روش با حرکت یک سیم داغ اشکال مورد نظر بر روی فوم ایجاد می شود،که امکان ساخت کوچکترین قالب های خفاظتی با دقت بالاتر از ±0.5 میلی متر فراهم می گردد. رسیدن به این دقت در سایر روش ها تقریبا غیر ممکن است.در دستگاه طراحی شده توسط شرکت بهیار صنعت سپاهان سعی بر این شده است که این محصول ضمن برابری از لحاظ کیفیت و امکانات در مقایسه با نمونه های خارجی،محیطی کاربرد پسند و راحت را جهت کارکرد اپراتور فراهم کند،که در نتیجه آن موجب تسریع در عملیات و مراحل انجام پرتودرمانی می شود.دستگاه تولید شده قابلیت برش انواع فوم با هر نوع چگالی را با دقت ±0.4 میلی متر فراهم می کند. در این مقاله به تشریح مراحل طراحی و ساخت دستگاه برش قالب های حفاظتی رادیوتراپی ساخت شرکت بهیار صنعت سپاهان پرداخته می شود.

عنوان مقاله به فارسی طراحی و ساخت دستگاه برش خودکار قالب بلوک های حفاظتی پرتودرمانی

Authors

Mr Hamid Mohammad Ghasemi (Behyaar Sanaat Sepahan) Mr Mahdi Nekooei (Behyaar Sanaat Sepahan) Mr Navid Nejatbakhsh (Behyaar Sanaat Sepahan)

Presentation materials

There are no materials yet.

Peer reviewing

Paper

Paper files: