25–26 Nov 2015
پژوهشگاه دانش‌های بنیادی
Asia/Tehran timezone
After your paper is ACCEPTED, Upload the last version of your full paper file in DOCX & PDF (from my contributions>view>files>add material)

Session

نشست پنجم

26 Nov 2015, 10:40
سالن همایش‌ها (پژوهشگاه دانش‌های بنیادی)

سالن همایش‌ها

پژوهشگاه دانش‌های بنیادی

تهران - فرمانیه - جنب کوه نور

Conveners

نشست پنجم

  • Rahman Eghbali

Presentation materials

There are no materials yet.

  1. Mr ali mohammad poursaleh (aeoi)
    26/11/2015, 10:40
    شتابگر رودوترون یزد
    Oral
    The different forms of loop coupler for coupling the input RF power to the acceleration cavity of electron accelerator at VHF frequency band was investigated. In this study, three forms of loop coupler considered and then by Comparison of simulation results using the CST software the best geometry is choice. Good coupling coefficient, position of coupler in the acceleration cavity and...
    Go to contribution page
  2. Dr OmidReza Kakuee (Nuclear Science & Technology Research Institute)
    26/11/2015, 11:00
  3. Dr Masoomeh Yarmohammadi Satri (School of Particle and accelerators, IPM, Tehran, Iran)
    26/11/2015, 11:20
    شتابگر خطی
    Oral
    Linac4 is the near future 160 MeV H- linear accelerator of the CERN presently under construction. It will replace the present 50 MeV proton Linac2 as injector of the proton accelerator complex and part of a project to upgrade the LHC injector. The Linac4 front-end, composed of a 45 keV ion source, a Low Energy Beam Transport (LEBT), a 352.2 MHz Radio Frequency Quadrupole (RFQ) which...
    Go to contribution page
  4. Mr Ali Moradi (Behyaar Sanaat Sepahan co.), Mr Yasser Fakhari (Behyaar Sanaat Sepahan co.)
    26/11/2015, 11:40
    کاربردها در پزشکی
    Oral
    To allow patients to be treated with beams from different directions, there is a need to be able to rotate the treatment head through 360º about the patient. The accelerator waveguide, microwave devices and the head assembly must be mounted on a gantry that enables the beam to be rotated around the patient. The design and manufacturing procedure of the mechanical system of the Behyaar medical...
    Go to contribution page
Building timetable...